Form Factor
|
Full-size PICMG (PCI/ISA)-bus CPU Card / Slot PC
PICMG version 1.0 (Rev. 2.0) and PCI version 2.0 compliant
with 4 x 32-bit bus master PCI and 8/16-bit ISA bus interface
|
CPU
|
Socket 478 Intel Pentium 4 / Celeron CPU
up to 3.06 GHz @ 533 / 400 MHz FSB
Support Intel 0.13- / 0.18-micron Northwood / Willamette CPU
Support Intel Hyper-Threading Technology
|
Memory
|
Two 184-pin DIMM sockets
Support up to 2 GB DDR200/266 SDRAM with ECC (No-register)
|
Chipset
|
Intel 845E chipset with 82845E MCH and 82801BA ICH2
|
Watchdog Timer
|
Programmable generates NMI or system reset watchdog timer
with 1 to 255 sec. / min. of time out value
|
Power Management
|
ACPI 1.0 compliant, supports power saving mode with ATX PSU
|
Real Time Clock
|
Intel ICH2 built-in RTC with onboard lithium battery
|
ISA High Drive
|
64mA ISA high drive capacity with TI 245 buffer
on the ISA address and data bus
|
PCI Enhanced IDE
|
Dual UltraATA/100 bus master IDE channels
Support up to 4 ATAPI devices on two 40-pin IDE ports
Jumper selectable Vcc power output on IDE2 for DiskOnModule
|
VGA Interface
|
4xAGP SiS315 VGA controller with 256-bit 3D engine
Onboard 64 MBytes DDR SGRAM independent video memory
External DB15 female connector on bracket
Internal 16-pin header connector
|
LAN Interface
|
Dual Intel PRO/100+ 10/100 Mbps Fast Ethernet interface
10/100Base-TX auto-switching, IEEE802.3U compliant
Primary LAN with Intel ICH2 and 82562ET Phy
Optional secondary LAN with PCI Intel 82559ER
External dual RJ45 connector with LED on bracket
|
PC/104-plus Interface
|
32-bit PCI-based PC/104-plus embedded peripheral interface
|
Multi-I/O Port
|
Intel ICH2 and LPC Winbond W83627HF-AW super-I/O controller
2 x RS-232 serial ports, 1 x SPP/EPP/ECP parallel port
2 x USB ports with USB 1.1 compliant
IrDA port, Floppy port, AT keyboard, PS/2 keyboard / mouse port
|
Solid State Disk
(DiskOnChip)
|
M-systems DiskOnChip socket supports DiskOnChip2000
32-pin DIP JEDEC single chip flash disk
Flash memory capacity up to 1 GBytes with ECC / EDC
8 KBytes of memory window
|
Environment
|
Power Requirement: +5V, +12V, -12V (5Vsb for ATX mode)
with Intel P4 additional +12V power input
Board Dimension: 338 x 122 mm (L x W)
Operation Temperature: 0 ~ 60oC (32 ~ 140oF)
|